Installing the expansion tank

• Replace rubber plugs (1).

  Parts:  Rubber plugs

  Courtesy of BMW OF NORTH AMERICA, INC.

• Connect expansion tank (1) to the tandem brake master cylinder.
• Replace retaining screw.

  Parts:  Retaining screw

• Fit retaining screw and tighten.

Courtesy of BMW OF NORTH AMERICA, INC.

• Connect the plug connection (1).

Courtesy of BMW OF NORTH AMERICA, INC.

• Install the water drain channel (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to CONNECTING THE BLEEDER UNIT FOR BRAKE FLUID (AFTER REPAIR, TOPPING UP BRAKE FLUID) .
• Refer to DISCONNECTING THE BLEEDER UNIT FOR THE BRAKE FLUID (AFTER REPAIR) .
• Refer to INSTALLING FRONT WINDSHIELD PANEL COVER .
• Refer to INSTALLING THE REAR HOOD SEAL .