Adhesion of brake pads to brake pistons

NOTE: TECHNICAL INFORMATION
After the brake pads have been installed they must immediately be bonded to the brake pistons:
Step on the brake pedal to the floor and hold the pressure for one minute. This causes the brake pads to adhere to the brake pistons.

Follow-up work

Refer to INSTALLING FRONT BRAKE PAD WEAR SENSOR (FIXED CALIPER BRAKE) .
Refer to PARTIALLY INSTALLING THE FRONT WHEEL ARCH COVER .
Refer to INSTALLING THE FRONT LEFT AND RIGHT WHEELS .
Refer to COMMISSIONING OR BEDDING IN (BRAKE) OF NEW BRAKE PADS AND DISCS (HIGH BRAKE) .