Install the front window frame trim

Precondition 

The door window glass is open.

• Feed in the trim (3)  .
• Tighten the screws (2)  .
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Window frame trim to window frame
  screw	tightening torque	2.4 Nm

• Coat the rubber window seal (1)  with water prior to installation and mount on the rear window guide.

  Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING THE WINDOW CHANNEL STRIP ON THE FRONT DOOR ON THE OUTSIDE .
• Refer to INSTALLING THE EXTERIOR MIRROR .
• Refer to INSTALLING FRONT INNER WEATHER STRIP .
• Refer to INSTALLING FRONT DOOR TRIM PANEL .
• Refer to INSTALLING THE COVER ON THE DOOR HANDLE .