Remove Bowden cable for front hood locks

Preliminary work 

• Refer to REMOVING THE INTAKE MANIFOLD FOR INTAKE SILENCER HOUSING .
• Refer to REMOVING INTAKE SILENCER HOUSING .
• Refer to REMOVING FRONT CROSS CONNECTION .
• Refer to REMOVING THE LEFT HOOD LOCK .
• Refer to REMOVING THE RIGHT HOOD LOCK .

• Unclip clutch housing for Bowden cable (1) from the body at the marked points.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Fold cover (1) of clutch housing for the Bowden cable (2) open to the front.
• Detach the Bowden cable (3).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Unclip clutch housing for the Bowden cable (1) from the body to the top.
• Guide out the Bowden cable (2) and remove it.

  Courtesy of BMW OF NORTH AMERICA, INC.