Remove BMW badge on the rear side panel
NOTE:
RISK OF DAMAGE
Careless handling of tools and sharp-edged components .
Scratches, surface damage .
Careless handling of tools and sharp-edged components .
Scratches, surface damage .
- Protect working area.
- Handle tools and components carefully.
- Tape off working area around the BMW badge (1) with adhesive tape.
- Carefully heat the BMW badge (1) with a hot air blower (temperature approx. 40-55°C).
- Carefully detach the BMW badge (1) from the adhesive strip with the special tool 0 496 571 (00 9 327)
and lever out of the guide pins (2)
.
The badge must be replaced after disassembly at all times.