Install both near lights on the tailgate

NOTE: Description is for left component only. Procedure on the right side is identical.

Check the clamps (1) at the rear light (2) for damage and replace if needed.

Courtesy of BMW OF NORTH AMERICA, INC.
Clip in the rear light (1) with the clamps (2).

Courtesy of BMW OF NORTH AMERICA, INC.
Clean the bonding surface for gutter strip (1) on the rear trim (2) and the rear light (3).
Replace the gutter strip (1).
Parts: Gutter strip
Bond the gutter strip (1) on the seal beginning from the top.

Courtesy of BMW OF NORTH AMERICA, INC.