Removing transfer box (VTG)

Preliminary work 

• Refer to DISCONNECTING THE NEGATIVE BATTERY CABLE OF THE SYSTEM BATTERY .
• Refer to REMOVING THE FRONT UNDERBODY PROTECTION .
• Refer to REMOVING THE CONNECTING SUPPORT FROM THE TUNNEL AT FRONT AND REAR .
• Refer to REMOVING THE CROSS STRUT WITH THE TORSION STRUT .
• Refer to REMOVING EXHAUST SYSTEM .
• Refer to REMOVING FRONT HEAT SHIELD .
• Refer to REMOVING HEAT SHIELD AT REAR .
• Refer to REMOVING PROP SHAFT .
• Refer to REMOVING THE WHEEL .
• Refer to REMOVING THE FRONT RIGHT WHEEL ARCH COVER .
• Refer to PARTIALLY REMOVING RIGHT OUTPUT SHAFT .
• Refer to REMOVING STARTER MOTOR .
• Refer to REMOVING THE INTERMEDIATE SHAFT WITH THE SUPPORT TUBE .
• Refer to REMOVING INTERMEDIATE SHAFT WITH SUPPORT TUBE .
• Refer to REMOVING HOLDER WITH RUBBER MOUNT .

• Loosen screws (1)  .
• Remove the heat shield.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Loosen screws (1)  .
• Remove the transfer box (VTG).

Courtesy of BMW OF NORTH AMERICA, INC.