Installing washer fluid reservoir

• Feed holder of washer fluid reservoir (1)  into the threaded bolt.
• Clip in washer fluid hose (2)  to holder (3)  .

  Courtesy of BMW OF NORTH AMERICA, INC.

• Connect and lock the hose pipes (3)  on the windscreen washer pump.
• Connect the connector (2)  to the window washer pump.
• Clip in the hose pipe (4)  at the washer fluid reservoir for the window washer system.
• Connect the connector (1)  to the washer fluid level switch.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Install and lock connecting piece (2)  .

  Ensure that the lock engages audibly.

• Tighten nut (1)  .
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Washer fluid reservoir to body
  Nut M6	Tightening torque	8 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Install the cover (3)  .
• Tighten down screw (2)  .
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Cover on body
  Hexagon screw	Tightening torque	3 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Install the expanding rivet (1)  .

Follow-up work 

• Refer to PARTIALLY INSTALLING THE FRONT WHEEL ARCH COVER .
• Refer to INSTALLING ALL WHEELS .