Partially remove the front wheel arch cover
Partially removing the front wheel arch trim
NOTE:
To provide a better overview: Schematic diagram with partially hidden components.
NOTE:
Description is for left component only. Procedure on the right side is identical.
- Remove the blind rivets (1).
- Release the wheel arch trim (2) in the area of the side panel from the clips (3).
- Release the wheel arch trim (2) from the latch mechanisms on the bumper and remove.
NOTE:
Description is for left component only.
Procedure on the right side is identical.
Procedure on the right side is identical.
- Unscrew all bolts and nuts (arrows).
- Guide the wheel arch cover (2) out.