Connect battery ground lead
NOTE:
TECHNICAL INFORMATION
For additional information see:
SAFETY INSTRUCTIONS FOR HANDLING VEHICLE BATTERY
, and
NOTES FOR DISCONNECTING AND CONNECTING THE VEHICLE BATTERY
, and
NOTES ON INTELLIGENT BATTERY SENSOR (IBS)
For additional information see:
SAFETY INSTRUCTIONS FOR HANDLING VEHICLE BATTERY
, and
NOTES FOR DISCONNECTING AND CONNECTING THE VEHICLE BATTERY
, and
NOTES ON INTELLIGENT BATTERY SENSOR (IBS)
- Remove the protective cover of the positive battery terminal.
- Position battery ground lead (2) .
- Tighten nut (1)
.TIGHTENING TORQUE SPECIFICATIONS
Battery terminal clamp with IBS positive battery terminal/negative battery terminal Nut M6 Tightening torque 5 Nm - If required, connect the connector (3) .