Install luggage compartment wheel arch trim panel at left
NOTE:
Schematic diagram is for example purposes. Some parts may differ in certain details.
- Push the luggage compartment wheel arch trim panel (1) at the bottom in the direction of the arrow and thread it into the guides (2) and under the C-pillar trim panel at the bottom.
- Position the lashing points (3) and tighten the screws (2).TIGHTENING TORQUE SPECIFICATIONS
Lashing point in trunk Bolt M8 x 22 Tightening torque 21 Nm - Clip in the covers (1).
Follow-up work
- Refer to INSTALLING THE LUGGAGE COMPARTMENT FLOOR COVERING .
- Refer to INSTALLING HOOK AND LOOP TAPE FOR THE VEHICLE TOOL KIT .
- Refer to INSTALLING TOOLKITS .
- Refer to INSTALLING THE EMERGENCY WHEEL .
- Refer to INSTALLING LOADING EDGE TRIM .
- Refer to INSTALLING THE LUGGAGE COMPARTMENT REMOVABLE PANEL .
- Refer to INSTALLING TRIM PANEL FOR STORAGE SHELF (PARCEL SHELF) .