Install front door trim panel

• Check the clips (1) and the stop pad (2) for damages, and replace if necessary.

  The clips (1) and the stop pads (2) must not be damaged or missing.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Install door trim panel and connect all the connectors.
• Attach the Bowden cable (1) on the door lock (2).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Engage the door trim panel (1) in the clamps (3) at the top.
• Position the door trim panel (1) correctly and clip it into the clips (2).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten the screws (1).
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Door trim panel to door
  Screw TS5x20	tightening torque	2.5 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• If fitted: Tighten down screw (1).
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Door trim panel to door
  Screw TS5x20	tightening torque	2.5 Nm

• Mount cover.

  Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING THE COVER ON THE DOOR HANDLE .