Install the cover on the outside door handle

Make sure the gasket (1) is fitted correctly.

Courtesy of BMW OF NORTH AMERICA, INC.
Check the latch mechanisms (1) of the cover (2) for damage and replace the cover (2) as needed.
The latch mechanisms (1) must not be damaged or missing.
When replacing the cover (2): Remount retaining plate (3).

Courtesy of BMW OF NORTH AMERICA, INC.
Install the cover (1) with the outside door handle (2) slightly open.

Courtesy of BMW OF NORTH AMERICA, INC.

Tighten down screw (2).

TIGHTENING TORQUE SPECIFICATIONS

Attachment bell to outside door handle support
screw	Tightening torque	3 Nm