Removing the tandem brake master cylinder
Preliminary work
- Refer to REMOVING REAR HOOD SEAL .
- Refer to REMOVING FRONT WINDSHIELD PANEL COVER .
- Refer to DISCONNECTING CABLE FROM BATTERY EARTH LEAD .
- Refer to REMOVING SUSPENSION CROSS-BRACE .
- Refer to REMOVING THE INTAKE MANIFOLD FOR INTAKE SILENCER HOUSING .
- Refer to REMOVING INTAKE SILENCER HOUSING .
- Refer to REMOVING THE SYSTEM BATTERY .
- Refer to REMOVING THE EXPANSION TANK (VEHICLE WITH AUTOMATIC TRANSMISSION) .
- (1) Unfasten brake lines.
- Loosen the nuts (2) and remove the tandem brake master cylinder (3).