Install E-box

Slide E-box (1) in the direction of the arrow into the guide (2) and install it.

Courtesy of BMW OF NORTH AMERICA, INC.
Make sure that the E-box (1) is positioned correctly at the FIREWALL (2).

Courtesy of BMW OF NORTH AMERICA, INC.

Tighten down screw (1).

TIGHTENING TORQUE SPECIFICATIONS

E-box to battery tray
M8X16	tightening torque	15 Nm

Courtesy of BMW OF NORTH AMERICA, INC.

Slide holder (1) in direction of arrow into the E-box (2) and install it.
Make sure the holder (1) engages audibly.

Courtesy of BMW OF NORTH AMERICA, INC.
Guide in the wiring harness section (2) of the engine in the direction of the arrow and install.
The locks (1) must engage audibly.

Courtesy of BMW OF NORTH AMERICA, INC.
Insert and install the wiring harness section (2) for the Valvetronic servomotor in the direction of the arrow.
The locks (1) must engage audibly.

Courtesy of BMW OF NORTH AMERICA, INC.
Feed in the wiring harness section (3) for injectors and ignition coils in the arrow direction and install.
The lock (2) must engage audibly.
Insert and install the positive battery cable (1).

Courtesy of BMW OF NORTH AMERICA, INC.
Connect connectors (1) and lock.
The connectors (1) must engage audibly.

Courtesy of BMW OF NORTH AMERICA, INC.
Connect and lock the connector (1) in the arrow direction.
The connectors (1) must engage audibly.

Courtesy of BMW OF NORTH AMERICA, INC.
Connect connectors (1) and lock.
The connector (1) must engage audibly.
Insert and install the connector (1) to the E-box (2) in the direction of the arrow.

Courtesy of BMW OF NORTH AMERICA, INC.
Feed the cover (2) into the guides (3) in the arrow direction and install.
The cover (2) must audibly engage into the guides (3).