Installing rear power window regulator

• Feed in and position the power windows (3) in the door.
• Tighten nuts (2).
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Power electric windows to door
  Nut M6, self-locking	tightening torque	9.5 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Connect plug connection (1) and lock.
• Remove adhesive tape (2) from the door window glass (1).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Slide the door window glass (1) downward and engage into the stop of the fixture (2).
• Make sure that the door window glass (1) correctly engages into fixture (2).

  Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING THE SOUND INSULATION ON THE REAR DOOR .
• Refer to INSTALLING REAR DOOR TRIM PANEL .
• Refer to INSTALLING THE COVER ON THE DOOR HANDLE .
• Refer to INITIALIZING THE POWER WINDOWS .