Install the outer window frame cover of the rear door

• Insert the cover (3),
• Tighten down screws (4),
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Window frame cover to door shell
  Oval-head screw Tightening torque	Tightening torque	2.3 Nm

• Connect the rubber seal (1) and the rubber window seal (2) on the cover (3).
• Make sure that the rubber window seal (2) touches the cover (3) correctly.

  Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING THE OUTER WINDOW CHANNEL STRIP ON THE REAR DOOR .