32 33 016 Replacing cover for sports steering wheel
Necessary preliminary work:
- Remove the AIRBAG UNIT
- If necessary, remove both SHIFT PADDLES FOR AUTOMATIC TRANSMISSION
- Remove both MULTIFUNCTION STEERING WHEEL SWITCHES
Removal:
Release screw (1) at design trim (2).
Unclip design trim (2) carefully upwards and remove.
Installation:
NOTE:
The retaining lug at the design trim (1) may not be damaged or missing.
Carefully clip in design trim (2) and tighten with screw (1).
Required reworking:
- Install both MULTIFUNCTION STEERING WHEEL SWITCHES
- If necessary, install both SHIFT PADDLES
- Install the AIRBAG UNIT