63 31 003 Removing and installing/replacing the interior roof light (rear)

Special tools required: 

• 00 9 325

Attention! 

Follow instructions for handling light bulbs (INTERIOR LIGHTS) .

Removal: 

Carefully lever out interior roof light (1) with special tool 00 9 325 in the direction of the arrows at the metal clamps (2).

Unlock and disconnect associated connector.

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement: 

• If necessary, REMOUNT BULB , check BULB TYPE

Installation: 

Connect associated connector.

Join interior roof light (1) in direction of arrow.

Installation note: 

The metal clamps (2) on the interior roof light (1) must not be damaged or missing.

Make sure interior roof light (1) is correctly seated.

Courtesy of BMW OF NORTH AMERICA, INC.