63 99 273 Replacing bulb for turn indicator, front left

IMPORTANT: Follow instructions for handling light bulbs (EXTERIOR LIGHTS) .

Removal:

Release bulb holder (1) by turning anti-clockwise and removing from headlight.

Courtesy of BMW OF NORTH AMERICA, INC.

Turn bulb (1) in direction of arrow and pull out of bulb holder (2).

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Installation note:

Join bulb (1) in bulb holder (2) opposite to direction of arrow.

Courtesy of BMW OF NORTH AMERICA, INC.

IMPORTANT: Risk of damage due to moisture penetration!

Installation note:

Check seal. Replace bulb holder (1) if necessary.

Comply with instructions for REPLACING THE PROTECTIVE CAP .

Turn bulb holder (1) clockwise to limit position.

Bulb holder (1) must lock correctly.

Courtesy of BMW OF NORTH AMERICA, INC.

Join bulb holder (1) in headlight and lock by turning clockwise.