63 21 400 Replace trim for water channel (left or right)

Removal:

Release screw (1).

Carefully unclip the trim for the water channel (2) from the rear light.

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Installation note:

The guides on the trim for the water channel (1) must not be damaged or missing.

Courtesy of BMW OF NORTH AMERICA, INC.

Clip in the trim for the water channel (2) at the rear light.

Tighten screw (1).

NOTE: Check trim for water channel (2) is correctly seated.

Courtesy of BMW OF NORTH AMERICA, INC.