33 32 Control arms, trailing arms
33 32 AXLE GUIDE AND AXLE STRUT - TIGHTENING TORQUE SPECIFICATIONS
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Upper wishbone to trailing arm | F39/F45/F46/F48/F49/F52 | M12 | Replace nut. Tighten in normal position. |
100 Nm |
| 2AZ Lower wishbone to trailing arm | F39/F45/F46/F48/F49/F52 | M12 | Replace screw and nut. Tighten in normal position. |
100 Nm |
| 3AZ Wishbone to rear axle support | F39/F45/F46/F48/F49/F52 | M12 | Replace nut. Tighten in normal position. |
100 Nm |
| 4AZ Trailing arm bearing support to trailing arm | F39/F45/F46/F48/F49/F52 | M12 | Replace nut. Tighten in normal position. |
100 Nm |
| 5AZ Trailing arm bearing support to body | F39/F45/F46/F48/F49/F52 | M12 | Replace screw. | 100 Nm |
| 6AZ Cover to trailing arm | F39/F45/F46/F48/F49/F52 | 3 Nm |