24 11 Transmission Case, Oil Sump
WARNING: This page is about a different variant/trim than selected.
24 11 TRANSMISSION CASE, OIL SUMP - TIGHTENING TORQUES SPECIFICATION
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Drain screw to transmission housing | F45/F46/F48/F52/F49 AISINF21FT/AISINF22AW | M18 | Replace sealing ring | 45 Nm |
| 2AZ Overflow screw in drain screw | F45/F46/F48/F52/F49 AISINF21FT/AISINF22AW | M6 | Replace sealing ring | 8 Nm |
| 3AZ Filler plug to transmission housing | F45/F46/F48/F52/F49 AISINF21FT/AISINF22AW | M14 | Replace sealing ring | 45 Nm |
| 4AZ Transmission oil cooler to transmission housing | F45/F46/F48/F52/F49 AISINF21FT/AISINF22AW | M8 | Replace O-rings | 21 Nm |