51 45 195 Removing and installing/replacing instrument panel trim, bottom right

WARNING: This page is about a different car, the 2019 BMW X1, 2018 BMW X1, 2017 BMW X1, and 2016 BMW X1. However, it is still accessible from the selected car via links, so may be relevant.

Removal:

Unscrew nuts (1).

Lower trim panel (2) slightly and disconnect plug connections behind it.

Feed the trim panel (2) out of the guides and remove.

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Hold on to the trim panel (2) and connect the plug connection.

Feed in the trim panel (2) into the guides at the front.

NOTE: Feed the guides of the trim panel (2) correctly into the corresponding holders on the vehicle.

Tighten down nuts (1).

Courtesy of BMW OF NORTH AMERICA, INC.