51 16 355 Removing and installing/replacing driver's side fold-down compartment
WARNING: This page is about a different car, the 2019 BMW X1, 2018 BMW X1, 2017 BMW X1, and 2016 BMW X1. However, it is still accessible from the selected car via links, so may be relevant.
When working on trim panel components, make sure that the sensitive surfaces are not scratched or damaged.
Removal:
Release screws (1).
Feed storage compartment (2) downwards out of instrument panel.
Installation:
Position the storage compartment (2) at bottom and feed upwards into the instrument panel.
Tighten down screws (1).
Tightening torque 51 16 9AZ .