11 51 Coolant pump
11 51 COOLANT PUMP - TIGHTENING TORQUE SPECIFICATIONS
| Type | Thread | Tightening Instructions | Torque Specification | |
|---|---|---|---|---|
| 1AZ Coolant pump to component carrier | B46M0/O0/B48M0/O0 | M6 | If the coolant pump is reused apply liquid seal 2.2. | 10 Nm |
| 2AZ Thermostat cover to component carrier | B46M0/O0/B48M0/O0 | M6 | 10 Nm | |
| 3AZ Coolant pump housing/component carrier to crankcase | B46M0/O0/B48M0/O0 | M8x35 | 19 Nm | |
| 4AZ Auxiliary coolant pump to engine block | B46M0/O0/B48M0/O0 | M8x22 | 19 Nm | |
| 5AZ Electric coolant pump to holder | B46M0/O0/B48M0/O0 | M6 hexagon nut | 8 Nm | |
| 6AZ Auxiliary coolant pump holder to cylinder head | B46M0/O0/B48M0/O0 | M6x16 | 8 Nm | |
| 7AZ Belt pulley to coolant pump | B46M0/O0/B48M0/O0 | M6x16 | 8 Nm |