11 41 115 Removing and installing/replacing hydraulic valve

Necessary preliminary tasks: 

• Remove FULL-FLOW OIL FILTER .

Removal: 

Unlock and disconnect the connector (1).

Release screw (2).

Courtesy of BMW OF NORTH AMERICA, INC.

Remove hydraulic valve (1) in direction of arrow.

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Parts:  Replace O-ring (1).

Oil O-ring (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Install hydraulic valve (1) in direction of arrow.

Courtesy of BMW OF NORTH AMERICA, INC.

Tighten screw (2).

Tightening torque: 11 00 2AZ .

Connect the plug (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Required follow-up work: 

• Install FULL-FLOW OIL FILTER 
• Check engine for leaks