Remove front axle completely

Lower the front axle support (1) by dimension (A) .
Dimension (A) = maximum 10 cm

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: TECHNICAL INFORMATION
Secure component against falling.

Release the screws (1) on the engine oil cooler (2) at left and right.

Courtesy of BMW OF NORTH AMERICA, INC.
Position engine oil cooler (1) behind the front axle support (2) .

Courtesy of BMW OF NORTH AMERICA, INC.
Completely lower and remove front axle carefully.

Courtesy of BMW OF NORTH AMERICA, INC.
Position the engine oil cooler (2) .
Screw in the screws (1) by a few turns.

Courtesy of BMW OF NORTH AMERICA, INC.