Connect the refrigerant line to the expansion valve
- Protect the oxygen sensor cable (1) from mechanical damage.
- Replace O-rings.
Parts: O-rings
- Correctly position the refrigerant line (3).
- Engage hose support (4).
- Tighten nut (2).
TIGHTENING TORQUE SPECIFICATION
| Refrigerant line to expansion valve/connecting piece | ||
|---|---|---|
| M6 | Tightening torque | 13 Nm |
- On version A:
Position the holder (1) correctly at the refrigerant line (2) and close.
- On version B:
Close the holder (1) on the refrigerant line (2).
- Protect the oxygen sensor cable (1) from mechanical damage.
- Replace O-rings.
Parts: O-rings
- Correctly position the refrigerant line (3).
- Engage hose support (4).
- Tighten nut (2).TIGHTENING TORQUE SPECIFICATION
Refrigerant line to expansion valve/connecting piece M6 Tightening torque 13 Nm - On version A:
Position the holder (1) correctly at the refrigerant line (2) and close.
- On version B:
Close the holder (1) on the refrigerant line (2).