Removing both left VANOS adjusters

Remove the slide rail of cylinder bank 2 (remove/install/replace the VANOS adjusters) 

• Loosen screw (1).
• Loosen screw (2).
• Remove the slide rail of cylinder bank 2 (3).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Loosen the VANOS central valve (1).

  Make sure the exhaust camshaft adjuster and the intake camshaft adjuster are not pulled off of the camshafts. 

• Remove the VANOS central valves (1).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Feed out and remove the VANOS adjusters (1).

  Courtesy of BMW OF NORTH AMERICA, INC.