Installing the special tool to secure the camshafts of cylinder bank 1
NOTE:
TECHNICAL INFORMATION
If the check finds that the valve timings are incorrect, they must be adjusted.
For additional information, see: ADJUSTING THE VALVE TIMING OF CYLINDER BANK 1 .
If the check finds that the valve timings are incorrect, they must be adjusted.
For additional information, see: ADJUSTING THE VALVE TIMING OF CYLINDER BANK 1 .
Check
- Position special tool 2 249 117 (1) on the camshafts of cylinder bank 1.
- Check if the camshafts can be fastened with the special tool 2 249 117 (1).
- Check if the special tool 2 249 117 can be brought in contact with the cylinder head using the two screws of the cylinder head cover (2).
Result
» The camshafts can be fastened.
Measure
- Timings are OK.
Loosen screws (2).
Remove the special tool 2 249 117 (1).
Continue the repair in the next step.
Result
» The camshafts cannot be fastened.
Measure
- Adjust the timings of cylinder bank 1.