Installing the rear tunnel connecting support

• Position the connecting support (3) at the rear side of the tunnel in the direction of the arrow.
• Tighten down screws (2).

TIGHTENING TORQUE SPECIFICATION

Rear connecting support tunnel to body
M8x30	Snug torque	28 Nm
	Angle of rotation	90°

Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten down screws (1).

TIGHTENING TORQUE SPECIFICATION

Undershield
Hexagon screw	tightening torque	2.6 Nm
Plastic nut	tightening torque	2.6 Nm