Installing the center stack module
NOTE:
RISK OF DAMAGE
Damage of high-quality surfaces.
Plastic wedges can damage high-quality surfaces.
Damage of high-quality surfaces.
Plastic wedges can damage high-quality surfaces.
- Protect surfaces from damage.
- Thread the center stack module (2) forwards into the guides and position it.
- Carefully install the center stack module (2) and connect it to the plug connector which is still present.
- Tighten down screws (1) .
TIGHTENING TORQUE SPECIFICATION
| Center stack module | ||
|---|---|---|
| Oval-head screw | tightening torque | 2.4 Nm |
TIGHTENING TORQUE SPECIFICATION
| Center stack module to tolerance compensation | ||
|---|---|---|
| Oval-head screw | tightening torque | 2.5 Nm |
TIGHTENING TORQUE SPECIFICATION
| Center stack module | ||
|---|---|---|
| Oval-head screw | tightening torque | 2.4 Nm |
Follow-up work
- Refer to INSTALLING THE WIRELESS CHARGING STORAGE .
- Refer to INSTALLING THE CUP HOLDER .
- Refer to INSTALLING THE CENTRAL INFORMATION DISPLAY (CID) .
- Refer to INSTALLING THE SPEAKER TRIM AT THE DASHBOARD .
- Refer to INSTALLING CENTER ARMREST .
- Refer to INSTALLING THE CENTER ARMREST STORAGE COMPARTMENT .
- Refer to INSTALLING THE REAR CENTER CONSOLE TRIM .
- Refer to ACTIVATING VEHICLE ELECTRICAL SYSTEM .