Installing The Rear Outer Wheel Arch Section

• Pre-clean bonding surfaces on vehicle and on new part with cleaning agent R2.

  CONSUMABLE SPECIFICATION 

  Cleaning agent R2

  500 ml

  83190417324

• Clean bonding surfaces on vehicle and on new part with cleaning agent R1.

  CONSUMABLE SPECIFICATION 

  Cleaning agent R1

  100 ml, Bottle

  83192211217

• Apply adhesive K5 to the bonding surfaces.
  ADHESIVE SPECIFICATION
  
  

  Body adhesive K5

  50 ml

  83192158654

• Install the new part and rivet in the area (1)  with blind rivets N3.

  CONSUMABLE SPECIFICATION 

  Blind rivet N3  Ø 4 mm; clamping area 1-3 mm

  83190301421

  NOTE: TECHNICAL INFORMATION 
  For additional information see: 41 00...
  Installation of a cavity sealing (not expanding)
• Apply sealant D1 on the new cavity sealing. Install cavity sealing (2)  .

Courtesy of BMW OF NORTH AMERICA, INC.

CONSUMABLE SPECIFICATION