Remove The Outer Wheel Arch Section With The Reinforcement

• Remove cavity sealings (1)  .

  Courtesy of BMW OF NORTH AMERICA, INC.

• Release welded connections in areas (1)  .
• Remove the reinforcement (2)  on the C-pillar.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Mark and cut the separating cut (1)  to dimension (a)  .

  Dimension (a)  = 10 - 15 mm

• Open welded connections in area (2)  .

  Courtesy of BMW OF NORTH AMERICA, INC.

• Mark and cut the separating cut (1)  to dimension (a)  .

  Dimension (a)  = 10 - 15 mm

• Release the welded connections in the areas (2)  and remove the outer wheel arch section.

Courtesy of BMW OF NORTH AMERICA, INC.