Secure the spring strut on the wishbone on the bottom left and right
NOTE:
Perform the steps on the right and left side.
Secure the spring strut to the bottom wishbone
- Position the spring strut on the bottom of the wishbone.
- Replace screw (2)
and nut (1)
.
Parts: Bolt, nut
- Insert the screw (2) .
- Tighten nut (1) .
TIGHTENING TORQUE SPECIFICATIONS
| Lower wishbone to spring strut clevis | ||
|---|---|---|
| M14 Replace screw and nut. Tighten in NORMAL POSITION . |
Joining torque | 165 Nm |
| Angle of rotation | 90° | |