Mount the alternator 2

Position the alternator (2) .
Secure the alternator (2) with the bolts through the holder for the positive battery cable.

Courtesy of BMW OF NORTH AMERICA, INC.
Position the coolant line.
Tighten the bolts (1) below the alternator.

TIGHTENING TORQUE SPECIFICATIONS

Alternator to crankcase
M8x80	Tightening torque	22 Nm

Courtesy of BMW OF NORTH AMERICA, INC.

Connect and audibly lock the connector (1) on the alternator.

Courtesy of BMW OF NORTH AMERICA, INC.
Position the coolant line.
Tighten down screw (1) .

TIGHTENING TORQUE SPECIFICATIONS

Thermostat housing to coolant pump
M6	Tightening torque	10 Nm

Courtesy of BMW OF NORTH AMERICA, INC.

TIGHTENING TORQUE SPECIFICATIONS

Alternator to crankcase
M8x80	Tightening torque	22 Nm

Courtesy of BMW OF NORTH AMERICA, INC.