Lower the headlining (with sliding/tilting sunroof)
Precondition
Sliding/tilting sunroof is open.
Seat surfaces of the front seats are moved down as far as possible.
Backrests of the front seats are folded back as far as possible.
- Loosen screws (1).
- Unclip panel down (1) from the clips (2) and remove it.
- Release headlining from the clips (1) with special tool 0 496 569 (00 9 325)
.
- Release headlining (1) with special tool from the clip (2) with the aid of a support person.
- Guide out the headlining (1) on the respective edge protection and place it onto the seats.