Installing the rear wheel arch cover on the right
NOTE:
Description is for left component only. Procedure on the right side is identical.
Removing the rear wheel arch cover
NOTE:
To provide a better overview: Schematic diagram with partially hidden components.
- Guide the wheel arch cover (3) in.
- Tighten down screws (1) .
- Tighten nuts (2) .
TIGHTENING TORQUES SPECIFICATION
| Wheel arch cover | ||
| screw | Tightening torque | 2.6 Nm |
| Plastic nut | Tightening torque | 3 Nm |