Remove engine from assembly stand
- Secure the workshop crane 2 220 718 in combination with the special tool 0 490 579 (11 0 070) at the engine mounting brackets of the engine.
- Slightly lift the engine with the workshop crane 2 220 718 and the special tool 0 490 579 (11 0 070) and
apply tension.
- Unscrew the bolts and lift the engine off the special tool 0 496 926 (11 9 030).
CAUTION:
Component with heavy weight.
Injury hazard!
Injury hazard!
- Note component's center of gravity.
- Support component using a jack.
- Secure component against falling off the jack.
- Remove the engine (1)
with the workshop crane and the special tool 0 490 567 (11 0 020)
from the assembly jig.