Remove heat management module

• All work on the high-voltage system may only be carried out by specially trained and technically experienced personnel.
• For additional information see:

  61 00... SAFETY INSTRUCTIONS ON HANDLING HYBRID CARS .

• For additional information see:

  61 25... NOTES ON REPAIR OF HIGH-VOLTAGE BATTERY UNIT .

Preliminary work 

• Refer to REMOVING THE ACOUSTIC COVER .
• Refer to REMOVING RESONATOR .
• Refer to REMOVING CLEAN AIR PIPE .
• Refer to REMOVING CHARGE AIR LINE .
• Refer to REMOVING THE ACOUSTIC COVER FOR THE ENGINE AT THE FRONT .
• Refer to REMOVING THE FRONT UNDERBODY PROTECTION OR FRONT THRUST FIELD .
• Refer to REMOVING THE FRONT THRUST FIELD .
• Refer to DRAINING THE COOLANT FROM THE HIGH-TEMPERATURE COOLING SYSTEM .

• Unlock and disconnect connector (1)  .
• Unlock and detach the coolant hoses (2)  and (3)  .

  Courtesy of BMW OF NORTH AMERICA, INC.

• Loosen screws in the order (6)  to (1)  .
  Fig 1: Heat Management Module Screws Loosening Sequence

  Courtesy of BMW OF NORTH AMERICA, INC.
• Remove the heat management module (1)  .

Courtesy of BMW OF NORTH AMERICA, INC.