Install fan cowl

• Feed in and install the fan cowl (1) in the direction of the arrow.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten the screws (1).

• Pin up connector (2) and lock audibly.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Secure the coolant lines (1) on the fan cowl.
• Secure the coolant lines to the clamps (2) and (3).

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING THE REAR TOP CROSS CONNECTION .
• Refer to INSTALLING LEFT INTAKE PORT .
• Refer to INSTALLING RIGHT AIR DUCT .
• Refer to INSTALLING THE LEFT-HAND AIR DUCT .
• Refer to INSTALLING LEFT INTAKE SILENCER HOUSING .
• Refer to INSTALLING RIGHT INTAKE SILENCER HOUSING .
• Refer to INSTALLING ACOUSTIC COVER .
• Refer to INSTALLING FANFARE HORN, RIGHT .
• Refer to INSTALLING THE FANFARE ON THE LEFT SIDE .
• Refer to INSTALLING THE CENTER TOP CROSS CONNECTION .
• Refer to INSTALLING BOTH HEADLIGHTS .
• Refer to INSTALLING BUMPER COVER, FRONT .
• Refer to INSTALLING FRONT SECTION OF THE FRONT WHEEL ARCH COVER (PARTIALLY REMOVED) .
• Refer to INSTALLING FRONT ORNAMENTAL GRILLE .
• Refer to INSTALLING THE COVER OF THE ENGINE COMPARTMENT CENTER .
• Refer to ADJUSTING HEADLIGHTS .