General Notes Regarding Bonding Rep-Alg-RAGRP41-4105400-V.3 (All 7' Series Models 2016-2022)

.

• The bonding surfaces must be kept free from contaminations of any kind. Avoid finger prints.
• Cleanliness is top priority when bonding!
• Cleaning agent: Cleaning agent R1

Expiry date of adhesive: 

• The glue cartridge is marked with a date.
• Do not use the adhesive after this date.

Adhesive application 2K: 

• Insert glue cartridge in adhesive gun, remove cap and allow a small quantity of adhesive to emerge. Strip adhesive components uniformly and attach mixing tube.
• Allow approximately 1 mixer length of mixed adhesive to emerge (color smears must no longer be noticeable in the adhesive). Only then apply the mixed adhesive to one side of the bonding surface.

Disposal of adhesive: 

• Hardened adhesive is disposed of as normal waste.
• Empty glue cartridges are disposed of as normal waste.
• Non-hardened adhesives and mixtures of adhesive and solvent and the like must be disposed of as hazardous waste.

These regulations apply to the Federal Republic of Germany. 

For other countries, comply with the (possibly differing) nationally applicable regulations.