Install Center Luggage Compartment Floor

• Pre-clean the bonding surface (1)  on the vehicle and on the new part with solvent cleaner R2.

  CONSUMABLE SPECIFICATION 

  Cleaning agent R2

  500 ml

  83190417324

• Clean the bonding surface (1)  on the vehicle and on the new part with solvent cleaner R1.

  Courtesy of BMW OF NORTH AMERICA, INC.

  CONSUMABLE SPECIFICATION 

  Cleaning agent R1

  100 ml, Bottle

  83192211217

• Apply adhesive K1 in area (1)  on the new part and the vehicle.

  ADHESIVE DESCRIPTION 

  Body adhesive K1

  195 ml

  83190413015

• Pre-clean the bonding surface (1)  on the vehicle and on the new part with solvent cleaner R2.

  CONSUMABLE SPECIFICATION 

  Cleaning agent R2

  500 ml

  83190417324

• Clean the bonding surface (1)  on the vehicle and on the new part with solvent cleaner R1.

  CONSUMABLE SPECIFICATION 

  Cleaning agent R1

  100 ml, Bottle

  83192211217

• Apply adhesive K1 in area (1)  on the new part and the vehicle.

  Courtesy of BMW OF NORTH AMERICA, INC.

  ADHESIVE DESCRIPTION 

  Body adhesive K1

  195 ml

  83190413015

  NOTE: TECHNICAL INFORMATION 
  When installing the new part, make sure that all bonding surfaces have sufficient adhesive.
• Install the new parts and rivet them with blind rivets N1 (2)  and blind rivets N2 (3)  .

  Courtesy of BMW OF NORTH AMERICA, INC.

  CONSUMABLE SPECIFICATION 

  Blind rivet N1  Ø 6.5 mm; clamping area 2.8-4.8 mm

  83190301414

  CONSUMABLE SPECIFICATION 

  Blind rivet N2  Ø 6.5 mm; clamping area 4.8-6.8 mm

  83190301419

• Weld the new part in the area (4)  .
• Rivet the new part in area (1)  with blind rivets N1 (2)  and blind rivets N2 (3)  .

  CONSUMABLE SPECIFICATION 

  Blind rivet N1  Ø 6.5 mm; clamping area 2.8-4.8 mm

  83190301414

  CONSUMABLE SPECIFICATION 

  Blind rivet N2  Ø 6.5 mm; clamping area 4.8-6.8 mm

  83190301419

• Weld the new part in the area (4)  .

  Courtesy of BMW OF NORTH AMERICA, INC.

• Weld the new part in area (1)  .

  Courtesy of BMW OF NORTH AMERICA, INC.

• Weld the new part in area (1)  .

  Courtesy of BMW OF NORTH AMERICA, INC.

• Weld the new part in area (1)  .

  Courtesy of BMW OF NORTH AMERICA, INC.

• Weld new parts in areas (1)  .

  Courtesy of BMW OF NORTH AMERICA, INC.

• Weld the new part in area (1)  .

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to ACTIVATE HIGH-VOLTAGE SYSTEM .
• Refer to INSTALL FLAP IN RIGHT LUGGAGE COMPARTMENT TRIM PANEL .