Removing Self-Tapping Screws
Precondition
- Vehicle is secured on the straightening bench.
NOTE:
TECHNICAL INFORMATION
- Observe the procedure for repair stage 3.
For additional information see: 41 00... Repair method for repair stage 3
- For information about stripping and rebuilding operations, refer to the surrounding text in the AIR. See the FRU number.
Preliminary work
- Supplying the new parts required
NOTE:
Schematic diagram is for example purposes. Some parts may differ in certain details.
- Remove the sealant with a wire brush attachment (1).
- Completely remove the sealant from the screw head (2).
- Vertically position the battery-powered drill (1) using special tool 2 411 349 on the self-tapping screw and release the self-tapping screw.