Installing the center cowl upper part

Position the center cowl upper part (1).
Tighten the bolts in the marked areas.

TIGHTENING TORQUE SPECIFICATIONS

Cowl upper part to bottom cowl
	Tightening torque	3 Nm

G14196386

Courtesy of BMW OF NORTH AMERICA, INC.

Version with mild hybrid technology:

Clip the line (1) onto the holders (arrows).

G14196385

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work

Refer to INSTALLING TENSION STRUT ON SHOCK TOWER .
Refer to INSTALLING WINDSHIELD PANEL COVER .
Refer to INSTALLING LEFT AND RIGHT WIPER ARM .
Refer to INSTALLING THE REAR RIGHT ENGINE COMPARTMENT COVER .
Refer to INSTALLING THE COVER OF THE ENGINE COMPARTMENT ON THE REAR LEFT .