Install the lower B-pillar trim panel

• Insert the B-pillar trim panel (1) and connect the associated connector, if applicable.
• With IHKA control panel (SA4NB) with 4-zone control: 

  Make sure the B-pillar trim panel (1) is correctly positioned at the air duct.

• Engage the B-pillar trim panel (1) in the clips (2).
• Check the B-pillar trim panel (1) for correct fit in relation to the front and rear edge protection.

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING THE UPPER B-PILLAR TRIM PANEL  .
• Refer to INSTALLING THE REAR DOOR SILL COVER STRIP .
• Refer to INSTALLING THE FRONT DOOR SILL COVER STRIP .