Installing the high-pressure nozzle of the headlight cleaning system

• Check the retaining lugs (1) on the high-pressure nozzle (2).

  Retaining lugs must not be damaged or missing.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Connect high pressure line (1).
• Install high-pressure nozzle (3) to the front.
• Check high-pressure nozzle (3) for correct detent (2).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Carefully bend up guide (1) of the cover (2) in arrow direction and clip into the high-pressure nozzle (3).
• Allow the high-pressure nozzle (3) of headlamp washer system to slide back slowly.

Courtesy of BMW OF NORTH AMERICA, INC.