Installing the gear selector switch (GWS)

Feed the cable into the cable clip at the gear selector switch (GWS) (2).
Connect plug (1).

Courtesy of BMW OF NORTH AMERICA, INC.
Position the gear selector switch (GWS) (2) in the center console (3).
Tighten the screws (1).

TIGHTENING TORQUE SPECIFICATIONS

Gear selector switch to support
Oval-head screw Replace screws.	Tightening torque	3.3 Nm

G12676334

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work

Refer to INSTALLING THE CENTER CONSOLE TRIM .