Install the trim strip of the tail light on the left side panel
NOTE:
RISK OF DAMAGE
Damage to the tail light.
The use of chemical or mechanical cleaning agents can destroy the tail light (e.g. micro-cracks).
Damage to the tail light.
The use of chemical or mechanical cleaning agents can destroy the tail light (e.g. micro-cracks).
- Do not use any chemical and mechanical cleaning agents.
- For additional information see: NOTES ON BONDING WITH ADHESIVE TAPE ON PLASTIC .
- Mask rear light (1) with the yellow plastic adhesive tape as illustrated.
- Detach the liner (1) on the trim strip (2) about 1 cm.
- Position and align the trim strip (2) on the tail light with the trunk lid closed.
- Slowly detach the liner (1) and at the same time press on the trim strip (2).
- Remove yellow plastic adhesive tape.
Follow-up work